Glockdoc's latest activity
-
GGlockdoc replied to the thread Timber Grow Light.i am aware. i was saying that the splitter that was provided by timber, and all the cobs are wired with 18 gauge. what i purchased is 16...
-
GGlockdoc replied to the thread Timber Grow Light.its all good. when the stuff comes in sunday ill put it together and see if it works. i have 2 sets of 3 single cobs all of them 1750k...
-
GHey, sorry that didn't work out for you. I have three Timber Lights. One of them may become my donor light if I run into a similar...
-
G1 to 4 probably won't work. you need the same config as the old one or your cobs won't get the right voltage. cutting an end off...
-
GGlockdoc replied to the thread Timber Grow Light.good to know. thanks. i did order the 1 to 3 one though so i should be good
-
GGlockdoc replied to the thread Timber Grow Light.im going to buy this and the one i linked . cut the ends of this and splice the ones i need . thanks bluter!!!
-
Gany 2 wire 16awg 1 to 3 y splitter should work there's piles of y splitters in different configurations. that's the same thing in 1...
-
GGlockdoc replied to the thread Timber Grow Light.sup johnny. i did reach out to him and he said "Hello I looked around the warehouse and cannot locate one. The gentleman who used to...
-
GCheck with High Grove Lighting. They are the former manufacturers of Timber grow lights. Dan is the owner and he will know what is...
-
G16 awg is the wire gauge and those are also automotive app connectors. look for two pin 16 awg connectors at those suppliers.
-
GGlockdoc replied to the thread Timber Grow Light.what kind of wire is it, do u know? i dont even know where to start on mouser
-
-
GGlockdoc added the media item 4876e534-29e1-4d6b-beb7-da6b8cb94d37.__CR0,0,970,600_PT0_SX970_V1___.jpg to Attachments Gallery.
-
Gthey operate on milliamps. i'd need a much better pic to see if i could recognize it. near certain digi and mouser would have it, or...
-
GGlockdoc replied to the thread Timber Grow Light.check the amazon link i left in last post. u can see it there with zoom and different angles
-
GGlockdoc replied to the thread Timber Grow Light.thanks for the insight. i found this on amazon, but id need an electrician to put it together for me, and would much rather purchase it...
